Article ID : 00411635 / Last Modified : 10/11/2026Print

    ECM-W5 / ECM-W5R: Sony Wireless Headphones Compatibility Information

    Models supporting use of the headphones' mic for recording and use of the headphones for monitoring by connecting wirelessly to the ECM-W5 wireless microphone and the ECM-W5R wireless receiver are listed below.

    • ◯: Supported
    • ー: Not supported

    November 11, 2026 *4 added

    Model name Connection mode Mic function
    *1
    Monitoring function
    *2
    Binaural recording function
    *1*3
    1000X THE COLLEXION (WH-1000XX) Classic Audio/LE Audio support ◯ ◯ *4 ー
    WF-1000XM6 (FW 2.0.0 and later) Classic Audio/LE Audio support ◯ ◯ ◯
    WF-1000XM6 (Prior to FW 2.0.0) Classic Audio/LE Audio support ◯ ◯ ー
    LinkBuds Clip (WF-LC900) Classic Audio only ◯ ー ー
    INZONE H9 II (WH-G910N) Classic Audio/LE Audio support ◯ ◯ *4 ー
    WH-1000XM6 Classic Audio/LE Audio support ◯ ◯ *4 ー
    WF-C710N Classic Audio only ◯ ー ー
    LinkBuds Fit (WF-LS910N) Classic Audio/LE Audio support ◯ ◯ ー
    LinkBuds Open (WF-L910) Classic Audio/LE Audio support ◯ ◯ ー
    WF-C510 Classic Audio only ◯ ー ー
    ULT WEAR (WH-ULT900N) Classic Audio only ◯ ー ー
    INZONE Buds (WF-G700N) LE Audio only ◯ ◯ ー
    WF-1000XM5 (FW 2.0.1 and later) Classic Audio/LE Audio support ◯ ◯ ー
    WF-1000XM5 (Prior to FW 2.0.1) Classic Audio only ◯ ー ー
    WF-C700N Classic Audio only ◯ ー ー
    WH-CH520 Classic Audio only ◯ ー ー
    WH-CH720N Classic Audio only ◯ ー ー
    Float Run (WI-OE610) Classic Audio only ◯ ー ー
    LinkBuds UC (WF-L900UC) Classic Audio only ◯ ー ー
    LinkBuds S (WF-LS900N) (FW 3.0.5 and later) Classic Audio/LE Audio support ◯ ◯ ー
    LinkBuds S (WF-LS900N) (Prior to FW 3.0.5) Classic Audio only ◯ ー ー
    INZONE H7 (WH-G700) Classic Audio only ◯ ー ー
    INZONE H9 (WH-G900N) Classic Audio only ◯ ー ー
    WI-C100 Classic Audio only ◯ ー ー
    WH-1000XM5 Classic Audio only ◯ ー ー
    LinkBuds (WF-L900) Classic Audio only ◯ ー ー
    WH-XB910N Classic Audio only ◯ ー ー
    WF-C500 Classic Audio only ◯ ー ー
    WF-1000XM4 Classic Audio only ◯ ー ー
    WH-1000XM4 Classic Audio only ◯ ー ー
    WF-SP800N Classic Audio only ◯ ー ー
    WI-SP510 Classic Audio only ◯ ー ー
    WH-CH710N Classic Audio only ◯ ー ー
    WF-XB700 Classic Audio only ◯ ー ー
    WF-H800 Classic Audio only ◯ ー ー
    • *1 Cases where the headphones are used as the input mic by selecting the following menu item in the Control menu

      SYSTEM → MODE SELECT → TWSMIC MODE

    • *2 Cases where the headphones are used as the monitoring device by selecting the following menu item in the Control menu

      SYSTEM → MODE SELECT → 2TX MODE

    • *3 On compatible models, you can select BINAURAL ON/OFF from TWS MENU in the Control menu.
      (These options are grayed out on incompatible models.)

    • *4 Please update the ECM-W5/ECM-W5R to Ver. 1.1 system software, scheduled for release in the second half of November 2026 or later.

    Using LE Audio on Sony headphones with LE Audio support

    Before pairing with the ECM-W5 and ECM-W5R, make sure to use the Sound Connect smartphone app to switch to the LE Audio connect mode.
    You can find detailed information on the Sound Connect smartphone app here.
    https://www.sony.co.jp/en/sca/

    Hint:
    If you connect to the receiver before using the Sound Connect smartphone app to switch to the LE Audio connect mode, the connection will be in the Classic Audio mode, and you will not be able to use the monitoring function or binaural recording function. To switch to the LE Audio connection mode, first cancel pairing between the receiver and headphones and then use the Sound Connect smartphone app to switch to the LE Audio connect mode before pairing the receiver and headphones once again.